Polymore Polymer Make-Up Systems

Polymore AB manufactures make-up units for dosing and dissolving of liquid polymers. The mixers are able to dissolve polymer concentrate flows between 0,004 litre/h to 54 liter/h. The mixers are divided into 3 series based on design and capacity. Common for all units are:

In-line mixing, meaning that preparation of the solution takes place in a continuous flow.

A pressure regulating valve stabilizes pressure variations in incoming water.

Included is a complete water system for supplying of preparation and dilution water.

Polymer dosing with a peristaltic metering pump which can be controlled with a 4-20 mA signal to correspond to appropriate need.

The combined polymer concentrate injection nipple and check valve are easily accessible from the top of the unit. Just losen two screws and the injection nipple is ready for inspection or cleaning.

A unique multi zone principle is used to effectively mix and activate the liquid polymer with the dilution water without creating inactivated polymer solution in form of "fish-eyes" or "angel-hair".

A large mixing chamber gives the polymer solution enough time to get activated. The mixing chamber is made of a non transparent material to guarantee that none of the activated polymer solution is destroyed by uv-light. A small transparent pipe placed at the outlet is used for visual inspection of the polymer solution.